As of May 4, 2024 we are out of stock of the pivoting option for this light. Parts are in production and should be back in stock by the end of May. Please reach out if you have any questions.
 
Kody lights are the brightest and most durable on the market providing peace of mind when using your bike rack.  
 
This light separates the brake, turn and tail lights into two light fixtures.  Each light fixture is 10" wide and provides bright, clear and visible signalling.  The lights are mounted to our custom heavy duty bracket for mounting to your bike rack.   This dual light does not sequence left or right like our single light; it flashes the entire fixture for turn signals.
 
The light pivots for use in both rack down with bikes loaded and rack up or stored positions.  To position the light you just loosen the clamps, pivot the light into the desired position and tighten the clamps.  
 
The rugged, highly visible Kody Technologies dual 10-inch LED Rack Lights creates eye-catching tail, brake, and turn signals. The light integrates cleanly on your rack and uses a standard 4-pin or 7-blade trailer connector for easy installation.  This rack light is designed specifically for 1UP bike racks including the Quik Rack, Heavy Duty, Super Duty and Xtreme Duty (does not fit the Equip-D rack).  Our lights can be used along side the 1Up EZ Pull plate and handle. Check out our other Kody lights for 1Up Racks.
 
Pivoting Light
This is a pivoting light.  The Pivot design allows you to rotate the light fixture for use in both the up / stored position as well as the down / bike loaded position.  To position the light just loosen the clamps, pivot the light into the desired position and tighten the clamps.
 
Cable Lengths
We provide three cable length options.  The cable lengths include Short  (5'), Long (9') and Super Long (13').   Each cable measures a bit longer than the foot length shown.  The Short cable will work in most applications using a standard bike rack with up to four bike trays.  Please see our FAQ page for information regarding how to select the right cable length for your rack set up.  
 
Vehicle Connections and Reverse Light
For this option, choose between a standard four pin and a standard seven blade connectors.  The four pin connection powers tail lights (including plate lights if added), turn signals and brake lights.   Upgrading to the seven blade option adds a heavier duty cable, the seven pin connector and licence plate light connector (we call it plate ready).  Choose the correct connection to eliminate the need for adapters and prepare for future upgrades.  Seven blade is required for reverse lights.   
 
License Plates
We have three options for plate holders and a plate light.  Please see the list below to understand each option.  For more information on our plate options please check out License Plate Holders and Plate Lights.  The plate holder varies between the different main trailer light set up.  
No Plate Accessory: I just want my light and nothing to do with any license plate holders.
Plate Holder - No Light: Plate holder with no electrical connection or light. This includes a bracket mounted to the main light which provides a licence plate mounting location and plate mount hardware
Plate Holder - With Light: Plate holder with plate light. This includes the plate holder mentioned above as well as a second bracket to install the plate light, integrated cable wiring and the plate light.
 
Configuration and Pricing Note: The total light set up pricing will not populate or update until you have made a selection for all options.  Once the selections are completed and the price is updated you can adjust your selections one at a time to see how the price varies.  
 
If you have any questions please contact us and we can discuss in more detail.