Kody lights are the brightest and most durable on the market providing peace of mind when using your bike rack.  The rugged, highly visible Kody Technologies dual 16-inch LED Rack Lights creates eye-catching tail, brake, and turn signals. The light integrates cleanly on your rack and uses a standard 4-pin trailer or 7-blade connector for easy installation. This rack light is designed specifically for the BackStage, HighNoon FC and MonoRail bike racks.  On the HighNoon, the end cap needs to be removed or modified to fit with the light.  This light will not fit on the Solo versions of these racks due to it's length.
 
This light separates the brake, turn and tail lights into independant left and right hand light fixtures.  Each light fixture is 16" wide and provides bright, clear and visible signalling.  The lights are installed on our custom heavy duty bracket for mounting to your bike rack.   The total width of the lights and bracket is just under 33" wide.  
 
This light pivots for use in both rack down with bikes loaded and rack up and stored positions.  To position the light just loosen the clamps, pivot the light into the desired position and tighten the clamps.  
 
Double 16" Light Options 
There are four different 16" wide light fixture options available including;
Basic brake/turn/tail light, white lens with red lights
Basic brake/turn/tail light with built in reverse, white lens
Our original sequencing light, red lens
Our original sequencing light (red lens) with added reverse light
Each light option is very bright and will help you be seen on the road.  Reverse light requires a seven blade trailer connector.  
 
Vehicle Connections and Reverse Light
For this option, choose between a standard four pin and a standard seven blade connectors.  The four pin connection powers tail lights (including plate lights if added), turn signals and brake lights.   Upgrading to the seven blade option adds a heavier duty cable, the seven pin connector and licence plate light connector (we call it plate ready).  Choose the correct connection to eliminate the need for adapters and prepare for future upgrades.  Seven blade is required for reverse lights.   
 
Cable Lengths
We provide three cable length options.  The cable lengths include Short  (5'), Long (9') and Super Long (13').   Each cable measures a bit longer than the foot length shown.  The Short cable will work in most applications using a standard bike rack with up to four bike trays.  Please see our FAQ page for information regarding how to select the right cable length for your rack set up.  
 
License Plates
We have three options for plate holders and a plate light.  Please see the list below to understand each option.  For more information on our plate options please check out License Plate Holders and Plate Lights.  The plate holder varies between the different main trailer light set up.  
No Plate Accessory: I just want my light and nothing to do with any license plate holders.
Plate Holder - No Light: Plate holder with no electrical connection or light.  This includes a bracket mounted to the main light which provides a licence plate mounting location and plate mount hardware
Plate Holder - With Light: Plate holder with plate light.  This includes the plate holder mentioned above as well as a second bracket to install the plate light, integrated cable wiring and the plate light.  
 
Configuration and Pricing Note: The total light price displayed will not populate or update until you have made a selection for all options.  Once the selections are completed and the price is updated you can adjust your selections one at a time to see how the price varies.  
 
If you have any questions please contact us and we can discuss in more detail.